Microlife BP A100 Plus Specifications download pdf (Page 9)

7BP A100 Plus

12.Safety, Care, Accuracy Test and Disposal



Safety and protection

• This device may only be used for the purposes described in

these instructions. The manufacturer cannot be held liable for

damage caused by incorrect application.

• This device comprises sensitive components and must be

treated with caution. Observe the storage and operating condi-

tions described in the «Technical Specifications» section.

• Protect it from:

- water and moisture

- extreme temperatures

- impact and dropping

- contamination and dust

- direct sunlight

- heat and cold

• The cuffs are sensitive and must be handled with care.

• Only pump up the cuff once fitted.

• Do not use this device close to strong electromagnetic fields

such as mobile telephones or radio installations.

• Do not use this device if you think it is damaged or notice

anything unusual.

• Never open this device.

• If the device is not going to be used for a prolonged period the

batteries should be removed.

• Read the additional safety information provided within the indi-

vidual sections of this instruction manual.

Ensure that children do not use this device unsupervised;

some parts are small enough to be swallowed.

Device care

Clean the device only with a soft, dry cloth.

Cleaning the cuff

You can machine wash the cuff cover at 30°C (do not iron!).



WARNING: Under no circumstances, however, may you

wash the inner bladder! Always remove the sensitive

bladder from the sleeve before washing and replace it care-

fully again afterwards.

Accuracy test

We recommend this device is tested for accuracy every 2 years or

after mechanical impact (e.g. being dropped). Please contact your

local Microlife-Service to arrange the test (see foreword).

Disposal

Batteries and electronic devices must be disposed of in

accordance with the locally applicable regulations, not with

domestic waste.

13.Guarantee

This device is covered by a 5 year guarantee from the date of

purchase. The guarantee is valid only on presentation of the guar-

antee card completed by the dealer (see back) confirming date of

purchase or the receipt.

• Batteries, cuff and wearing parts are not included.

• Opening or altering the device invalidates the guarantee.

• The guarantee does not cover damage caused by improper

handling, discharged batteries, accidents or non-compliance

with the operating instructions.

Please contact your local Microlife-Service (see foreword).

14.Technical Specifications

This device complies with the requirements of the Medical Device

Directive 93/42/EEC.

Technical alterations reserved.

Operating temperature:

10 - 40 °C / 50 - 104 °F

15 - 95 % relative maximum humidity

Storage temperature:

-20 - +55 °C / -4 - +131 °F

15 - 95 % relative maximum humidity

Weight:

748 g (including batteries)

Dimensions:

160 x 140 x 98 mm

Measuring procedure:

oscillometric, corresponding to Korotkoff

method: Phase I systolic, Phase V

diastolic

Measurement range:

20 - 280 mmHg – blood pressure

40 - 200 beats per minute – pulse

Cuff pressure display

range:

0 - 299 mmHg

Resolution:

1 mmHg

Static accuracy:

pressure within ± 3 mmHg

Pulse accuracy:

± 5 % of the readout value

Voltage source:

4 x 1.5 V Batteries; size AA

Mains adapter DC 6V, 600 mA (optional)

Reference to

standards:

EN 1060-1 /-3 /-4; IEC 60601-1;

IEC 60601-1-2 (EMC)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 119 120

Comments to this Manuals

No comments

Microlife BP A100 Plus Specifications Page 9

Comments to this Manuals

Related products and manuals for Blood pressure units Microlife BP A100 Plus